A-1 (E)
BKMA-7031
The following parameters are added as the circuit board parameters of the MAV-70 XGI when the
BKMA-7031 is installed.
BKMA-7031 Video Decode Parameters
Parameter
Setup Value
Function
Blank Line
.
BLANK (Default)
Blanking is turned ON/OFF for each of
10 to 22 (NTSC)
.
THROU
the V. blanking lines when BLANK of the video
7 to 22 (PAL)
signal is selected.
(Blanking applies to both the Y/C signal and to
both the odd and even fields at the same time.)
Video Gain
.
3.0 dB
Sets the video gain of the output signal.
.
2.8 to
_
2.8 dB (0.2 dB step)
. _
3.0 to
_
6.0 dB (1.0 dB step)
. _
10.0 dB
. _
20.0 dB
.
OFF (Default : 0 dB)
Chroma Gain
.
3.0 dB
Sets the chroma gain of the output signal.
.
2.8 to
_
2.8 dB (0.2 dB step)
. _
3.0 to
_
6.0 dB (1.0 dB step)
. _
10.0 dB
. _
20.0 dB
.
OFF (Default : 0.0 dB)
Black Level
. _
30.0 IRE
Sets the black level of the output signal.
. _
29.5 to 29.5 IRE (0.5 IRE step)
.
30.0 IRE (Default : 0.0 IRE)
Sys. Phase Sync
±
125
u
s (Default : 0
u
s)
Sets the sync phase of the system sync.
Sys. Phase Sync (F)
±
50 CK
Performs the fine adjustment of the sync phase
(1/27
u
s step) (Default : 0 CK)
of the system sync.
Chroma Phase
±
30
d
(0.23
d
step. 256 steps in all)
Sets the chroma phase.
(Default : 0
d
)
Chroma Phase Mode
.
COMPOSITE : composite mode
Select the chroma phase modes.
(Default)
.
COMPONENT : component mode
Vid Frz Mode
.
FIELD FRZ F1 : The mode that
Selects the video freeze modes.
freezes the video
signal at the first field
(Default)
.
FIELD FRZ F2 : The mode that
freezes the video
signal at the second
field.
.
FRAME FRZ :
The mode that
freezes the video
signal at the video
frame
Y_add Mode
.
AUTO (Default)
Selects the Y add modes.
.
OFF
ESR Mode
.
AUTO (Default)
Selects the ESR (Edge Subcarrier Reducer)
.
ON
modes.
VITC Position 1 NTSC
10 to 20 (Default : 16)
Selects the line to which VITC is going to be
VITC Position 2 NTSC
10 to 20 (Default : 18)
inserted in the NTSC signal.
VITC Position 1 PAL
7 to 22 (Default : 13)
Selects the line to which VITC is going to be
VITC Position 2 PAL
7 to 22 (Default : 15)
inserted in the PAL signal.
Appendix
Parameters
