![Sony BDP-BX2 Service Manual Download Page 91](http://html.mh-extra.com/html/sony/bdp-bx2/bdp-bx2_service-manual_391596091.webp)
9-2
BDP-BX2/S360
Power Supply (System) flowchart
AC IN
Check the output voltages from the power
supply block.
Are the following voltages OK?
CN301 pin 3, 4:+12V (UNSW12V)
CN301 pin 7, 8, 9: +5.8V (UNSW6V)
CN801 pin 1: +12V (UNSW12VA)
CN801 pin 3: +6V (UNSW6VA)
CN801 pin 5: -9V (UNSW-9VA)
Yes
Check of fuses
Have any of the following fuses blown?
No
Replace blown fuses.
Replace the MB board if there is no
improvement.
MB board: PS301, PS303, PS304, PS802,
PS803, PS804
FR board: PS701
Yes
Check the following power control signals
while the power is ON.
Are they H level (3.3 V)?
No
To IFcon section flowchart
PCONT1: MB board R304
PCONT2: MB board R309
PCONT3: MB board R376
PCONT3: MB board R367
ATA_PCONT: MB board CN301 pin 11
ATA_PCONT2: MB board C1285 (+ side)
Yes
Check the voltages based on the schematic
diagram.
Are they output correctly?
No
Voltage lines that are not output are shorted
to GND.
No
Failure of power supply IC --> Replace the
IC. Replace the MB board if there is no
improvement.
To Drive flowchart
BU Adjustment Flow [yy] ~ After BU/MB
Replacement ~
Yes
Yes
Power supply is OK
Replace the MB board when the parts on
that voltage line cannot be identified as
shorted.
To Drive flowchart
BU Adjustment Flow [yy] ~ After BU/MB
Replacement ~
Check that the harness has been inserted
properly. If there is no problem, replace the
BU Adjustment Flow [yy] ~ After BU/MB
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299