3-8 (E)
BDX-D1000
3-3. ISR
3-3-4. Functions of Commands
*
*
*
*
*
RST (Reset)
This command is used to reset the ISR processor (soft-
ware).
When reset processing is complete, the BDX-D1000
returns “
*
ATN:OPC;”.
*
*
*
*
*
IDN? (Identify Query)
This command requests the identity information of the
BDX-D1000.
The BDX-D1000 returns the following responses.
Manufacturer
: SONY
Model
: BDX-D1000
Device ID
: Same data as that set for DEVID
command. (If the device-id is not
defied, the BDX-D1000 returns
“NONE”.)
Serial number
: Serial number of the BDX-D1000
(five digits)
Software version
: 1.00
Virtual machine type : NONE
VM sub-address
: NONE
Destination
: NONE
*
*
*
*
*
TST ##### (Test)
This command instructs the BDX-D1000 to execute the
specified self-diagnostics.
Test numbers and descriptions are as follows:
Test No.
Description
2
DEC Board
3
TSI Board
4
DIO Board
5
DAC Board
6
DP Board
It can be requested these self-diagnostics menus by using
“HELP:TST?” command.
When the self-diagnostics is completed, the BDX-D1000
returns “
*
ATN:OPC;”.
3-3-3. Supported Commands
The BDX-D1000 supports the following commands.
For more detailed information of each command, refer to
the ISR PROTOCOL manual.
Common Command
Description
*
RST;
Resets ISR software.
*
IDN?;
Requests ID data.
*
TST #####;
Instruct to execute self-diagnostics.
*
TST?;
Requests result of self-diagnostics.
*
FLAGS?;
Requests flag data.
*
STATUS?;
Requests general operation status.
*
CMDERR?;
Requests to read command error
queue.
*
MSG? #####;
Requests error/warning status.
SONY Private Command
Description
HELP:TST?;
Requests test menu.
DEVID;device-id
Sets device ID.
