Sony AM-NX9, Service Manual

Page: 17 / 62

17
AM-NX9
Sound Skip Check Result Display Mode
This set can display the count of errors that occurred during the
recording/playing for checking.
• Setting Method of Sound Skip Check Result Display
Mode
1. Set the test mode (see page 13).
2. Press the
[MENU]
key and the playing or recording sound skip
result display mode becomes active respectively where the LCD
displays the following.
3. When the
[MENU]
key is pressed, total error count is displayed
on the LCD, and each time the > key is pressed, the dis-
play item moves down by one as shown below. Also, if
the
. key is pressed, the display item moves up by one.
Total count of play
system errors (hex.)
Total count of record
system errors (hex.)
Set LCD display
P * * R * *
000
Set LCD display
004
• Cause of Sound Skip Error
Cause of error Description of error
EIB Sound error correction error
Play
Stat Decoder status error
Adrs Address access error
BEmp Buffer is empty
4. To quit the sound skip check result display mode and to return
to the test mode (display check mode), press the
STOP/CANCEL
x
key.
• Setting Method of Key Check Mode
1. Set the test mode (see page 13).
2. Press the
[DOWN LOAD]
key activates the key check mode.
3. When each key on the set is pressed, its name is displayed on
the set LCD. (Operated position is displayed for 4 seconds
after the slide switch is operated.
Example1: When the
>
key on the set is pressed:
4. When all keys were checked or if the upper panel is opened,
the key check mode quits and the test mode (display check
mode) comes back.
Set LCD display
F F
004
0 00
P * * R * *
0 00
E I B * *
0 00
S t a t * *
0 00
A d r s * *
0 00
B E m p * *
0 00
# # # # # #
P**R**
: Total play/record errors (hex.)
** : Counter of sound skip check each item (hex.)
######
: 6-digit address where sound was skipped last (hex.)
Playing sound skip
result display