Sony Alpha 7 III, Help Manual

Page: 512 / 666

Help Guide
Interchangeable Lens Digital Camera
ILCE-7M3
α7III
SteadyShot Settings
You can shoot with an appropriate SteadyShot setting for the attached lens.
Menu item details
Auto:
Performs the SteadyShot function automatically according to the information obtained from the attached lens.
Manual:
Performs the SteadyShot function according to the focal-length set using [SteadyS. Focal Len.]. (8mm-1000mm)
Check the focal-length index (A) and set the focal-length.
Note
The SteadyShot function may not work optimally when the power has just been turned on, right after you point the camera
towards a subject, or when the shutter button has been pressed all the way down without stopping halfway.
When using a tripod, etc., make sure to turn off the SteadyShot function because this can cause any malfunction when shooting.
[SteadyShot Settings] will be unavailable when MENU→ (Camera Settings2)→[SteadyShot] is set to [Off].
When the camera cannot obtain focal length information from the lens, the SteadyShot function does not work correctly. Set
[SteadyShot Adjust.] to [Manual] and set [SteadyS. Focal Len.] to match the lens you are using. The current set value of the
SteadyShot focal length will display to the side of
.
When using an SEL16F28 lens (sold separately) with a teleconverter, etc., set [SteadyShot Adjust.] to [Manual] and set the focal
length.
When you set [SteadyShot] to [On]/[Off], the SteadyShot settings of the camera and lens switch at the same time.
If a lens equipped with a SteadyShot switch is attached, the settings can only be changed using that switch on the lens. You
cannot switch the settings using the camera.
Related Topic
SteadyShot
4-732-947-14(1) Copyright 2018 Sony Corporation
MENU →
(Camera Settings2) → [SteadyShot] → [On].
1
[SteadyShot Settings] → [SteadyShot Adjust.] → desired setting.
2
512