![background image](http://html.mh-extra.com/html/sony/aiwa-cx-jd5/aiwa-cx-jd5_service-manual_420209027.webp)
27
CX-JD5
2-7. Disc Check Memory
Disc Check Memory
1. SL Disc check
2. SL Disc check
3. SL Disc check
Exit: RETURN
On this screen, measure the mirror time of chucked disc, and write
to the EEPROM.
2-8. Error Rate Display
Error Rate Display
UC
CR
Address
PI1 Err
Now xx xxxx xxxxxxxx
Max xx xxxx xxxxxxxx
Avg xx xxxx
PI2 Err
Now xx xxxx xxxxxxxx
Max xx xxxx xxxxxxxx
Avg xx xxxx
PO Err
Now xx xxxx xxxxxxxx
Max xx xxxx xxxxxxxx
Avg xx xxxx
Exit: RETURN
On this screen, measure and display the error rate.
UC : Incorrect value
CR : Correct value
Add : Address
2-9. SACD Water Mark Check
SACD Water Mark Check
PSP AMP
PSN
Start: ENTER
Exit: RETURN
On this screen, measure the PSP AMP value and PSN value of SACD
water mark.
3. MECHA AGING
On the Test Mode Menu screen, selecting
[3]
executes the aging of
the mechanism deck.
### Aging Test MENU ###
** Pls use over 40 min.CD **
Operation Menu
1. Open/Close Test
Exit: RETURN
1)
Set over-40-min. CDs in Disc 1 to 3.
2)
On the Aging Test MENU screen, press the
[1]
key on the
remote commander to display the Open/Close Test screen.
3)
Insert discs and press the
[ENTER]
key on the remote
commander.
4)
Is starts the aging.
During aging, the disc number, operating status and repeat cycle
are displayed. Aging can be aborted at any time by pressing
the
[RETURN]
key. After the operation is stopped, press the
[RETURN]
key to return to the Aging Test MENU.
Summary of Contents for Aiwa CX-JD5
Page 125: ...125 CX JD5 MEMO ...