Sony A7RIII ILCE-7RM3A, Operating Instructions Manual

Page: 303 / 763

Help Guide
Interchangeable Lens Digital Camera
ILCE-7RM3A
α7RIII
Shooting still images with a higher resolution (Px. Shift Multi Shoot.)
You can create images with a higher resolution than is possible with regular shooting by recording four RAW images and
then combining them on a computer. This is helpful when shooting still subjects such as works of art or architecture.
Select MENU →
(Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [Off] beforehand.
Hint
You can also perform [Px. Shift Multi Shoot.] without using Imaging Edge Desktop (Remote). Select MENU → (Camera
Settings1) → [Px. Shift Multi Shoot.] and set the recording interval, and then perform shooting. You can import the four recorded
RAW images in the computer and combine them using Imaging Edge Desktop (Viewer). If you will not be using Imaging Edge
Desktop (Remote) for shooting, use a Wireless Remote Commander (sold separately) or the [Self-timer] function in order to avoid
camera shaking and subject blurring.
Note
If camera shaking and subject blurring occurs, the RAW images recorded with [Px. Shift Multi Shoot.] may not be combined
properly. Even when the subject is remaining still, if a nearby person or object moves, the RAW images may not be combined
properly because the lighting of the subject can change.
RAW images recorded with [Px. Shift Multi Shoot.] cannot be combined using the camera. Use Imaging Edge Desktop (Viewer)
to combine the images.
In [Px. Shift Multi Shoot.], some settings are locked as follows:
[ File Format]: [RAW]
[ RAW File Type]: [Uncompressed]
[ Silent Shooting]: [On]
In [Px. Shift Multi Shoot.], you cannot perform bulb shooting.
If shooting is set to a mode other than P/A/S/M, you cannot perform [Px. Shift Multi Shoot.].
MENU → (Setup) → [USB Connection] → [PC Remote].
1
Connect the camera to a computer using a USB cable, and then launch Imaging Edge Desktop (Remote) on
the computer.
2
Secure the camera using a tripod. Perform [Px. Shift Multi Shoot.] using Imaging Edge Desktop (Remote).
The camera will record four RAW images with the selected interval. The images will be saved on the computer
along with the combined image.
Try to avoid camera shaking or blurring of the subject.
The four RAW images are recorded with the same settings. You cannot change the settings during the interval
between the recordings.
You can cancel the recording by pressing the center of the control wheel during the interval between the
recordings.
If you will not be using a flash (sold separately), select 0.5 seconds as the shooting interval in Imaging Edge
Desktop (Remote). If using a flash, set the interval according to the charging time of your flash.
The flash-syncing speed is 1/13 second. When [Exposure step] is set to [0.5EV], the shutter speed cannot be
set faster than 1/10 second.
For techniques for [Px. Shift Multi Shoot.], refer to the following support site.
https://www.sony.net/psms/
3
212