Sony A230 Instruction Manual Download Page 82

Page: 82 / 162

Setting ISO

Sensitivity to light is expressed by the ISO number (recommended
exposure index). The larger the number, the higher the sensitivity.

Notes

• When the exposure mode is set to AUTO or Scene Selection, ISO is fixed to AUTO

and you cannot select other ISO numbers.

• When the exposure mode is set to P/A/S and ISO is set to [AUTO], ISO is

automatically set between ISO 100 and ISO 400.

• The [AUTO] setting is not provided in recording mode M. If you change the

recording mode to M with the [AUTO] setting, it is switched to [100]. Set the ISO
according to your shooting conditions.

Press ISO on the control button to
display the ISO screen.

Select the desired value with

on the control button.

• The larger the number, the higher the noise level.

Summary of Contents for A230



































































































































































Search results

Summary of Contents for A230

Reviews:

Related manuals for A230

Brands by name

Popular brands

Sony A230, Instruction Manual

Search results

Summary of Contents for A230

Reviews:

Related manuals for A230

Brands by name

Popular brands