Sony A230 Instruction Manual Download Page 64

Page: 64 / 162

• When the shutter speed is slower, use a tripod.
• When shooting an indoor sport, select a higher ISO sensitivity.

Notes

• The

(Camera shake warning) indicator is not indicated in shutter speed priority

mode.

• The higher the ISO sensitivity, the more conspicuous the noise.
• When the shutter speed is one second or more, noise reduction (Long exp.NR) will

be done after shooting. You cannot do any further shooting during the reduction.

• Set the flash mode to (Fill-flash) when you shoot with the flash (page 75).

However, when using the flash, if you close the aperture (a larger F-number) by
making the shutter speed slower, the light of the flash will not reach distant subjects.

Select the shutter speed with the
control dial.

Shutter speed

Adjust the focus and shoot the
subject.

The aperture is automatically adjusted to
obtain correct exposure.
• When the camera judges that the proper

exposure is not obtained with the
selected shutter speed, the aperture
value flashes. In such cases, adjust the
shutter speed again.

Aperture (F-number)

Shooting techniques

Summary of Contents for A230



































































































































































Search results

Summary of Contents for A230

Reviews:

Related manuals for A230

Brands by name

Popular brands

Sony A230, Instruction Manual

Search results

Summary of Contents for A230

Reviews:

Related manuals for A230

Brands by name

Popular brands