manualshive.com logo in svg

Sony A1ll, User Manual

Share
Download
Sony A1ll User Manual Download Page 32

UXP X

2014-12-05

32

 / 55

IxD Blueprint

UXC

CONFIDENTIAL

ASW224 ASW256 ASW223 ASW215

14 

Remote mode

14.1 

Overview

AS A: user I WANT TO:  control certain functionality from A1ll by tapping.
AS A: user I WANT TO:  design which functionality should be linked to tapping.

Examples
AS A: user I WANT TO:  have a simple way to control the media player.

It is possible to control a set of up to three actions from A1ll by tapping 
one, two or three times. In AHA it is possible to select which set of actions 
that should be controlled. 

The user can also design a custom set of actions 

containing one to three actions.

The user enters remote mode by single, double or triple tap after key short 
press, the initial tap sequence is handled as an action. When in remote mode 
all three LEDs are lit in green. As long as A1II is in remote mode single tap, 
double tap and triple tap is detected and can be linked to the current set of 
actions that the user has selected in AHA. Vibration feedback indicates if 
single, double or triple tap was detected.

The hardware has a time out for how long A1ll can be in remote mode but a 
new tap can restart the time out. Disconnect, incoming call, alarm/ Smart 
Wake up alarm or a new key press will make A1ll exit remote mode.

In remote mode all steps (and possible sleep states) are still logged

. 

14.1.1 

Short press the key 

and tap to enter remote 

mode.

14.1.2 

All LEDs are lit in 

green when in remote mode. 

NOTE: Remote mode should only be accessible when connected.

Summary of Contents for A1ll
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands