16
Changing the operative direction
The operative direction of controls is factory-
set as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press
(SOUND)
for two seconds while
pushing the VOL control.
Tip
You can also change the operative direction of
these controls with the unit (see “Changing the
sound and display settings” on page 17).
Press
(DSPL)
to change
the displayed items.
Press
(SOUND)
to
adjust the volume
and sound menu.
To decrease
To increase
OFF
By rotating the control
(the SEEK/AMS control)
Rotate the control and release it to:
•Locate the beginnings of tracks on the
tape. Rotate and hold the control, and
release it to fast-wind the tape. To start
playback while fast-winding the tape,
press
(MODE)
.
•Tune in stations automatically. Rotate and
hold the control to find a specific station.
By pushing in and rotating the
control (the PRESET/DISC control)
Push in and rotate the control to:
Receive the stations memorized on the
number buttons.
Other operations
Rotate the VOL control to
adjust the volume.
Press
(ATT)
to
attenuate the
sound.
Press
(OFF)
to turn
off the unit.
