25
GB
Add
ition
al In
forma
tion
Troubleshooting
When the
1
(standby) indicator is flashing, count how many times it flashes (interval
time is three seconds).
Press
1
on the TV to turn it off, disconnect the AC power cord (mains lead), and inform your dealer
or Sony service centre of how the indicator flashes (number of flashes).
When the
1
(standby) indicator is not flashing, check the items in the tables as
follows.
Also refer to “Troubleshooting” in the i-Manual. If the problem persists, have your TV serviced by
qualified service personnel.
Additional Information
Condition
Explanation/Solution
There is no picture (screen
is dark) and no sound.
•
Check the antenna (aerial)/cable connection.
•
Connect the TV to the AC power (mains), and press
1
on the TV.
•
If the
1
(standby) indicator lights up in red, press
"/1
.
Tiny black points and/or
bright points appear on the
screen.
•
The screen is composed of pixels. Tiny black points and/or bright
points (pixels) on the screen do not indicate a malfunction.
Some programmes cannot
be tuned.
•
Check the antenna (aerial) or dish.
•
The satellite cable might be short-circuited or there might be
connection problems of the cable. Check the cable and connection
and then turn the TV off with the Mains power On / Off switch,
and turn it on again.
•
The frequency you entered is out of range. Consult the received
satellite broadcasting company.
The TV turns off
automatically (the TV
enters standby mode).
•
Check if the “Sleep Timer” is activated, or confirm the
“Duration” setting of “On Timer”.
•
Check if the “Idle TV Standby” is activated.
•
Check if the “Presence Sensor” is activated. When no viewer is
detected in front of the TV for a preset time, the picture
automatically turns off, while leaving only the TV sound on.
Additionally, after 30 minutes in picture off mode, the TV will
switch to standby mode.
The remote does not
function.
•
Replace the batteries.
•
Your TV may be in SYNC mode.
Press
SYNC MENU
, select “TV Control” and then select “Home
(Menu)” or “Options” to control the TV.
The “Parental Lock”
password has been
forgotten.
•
Enter 9999 for the PIN code. (PIN code 9999 is always accepted.)
The TV surrounds become
warm.
•
When the TV is used for an extended period, the TV surrounds
become warm.
You may feel hot when touching there by the hand.
