55
GB
T
u
ne
r Operations
To create an index name
1
Use
V
/
v
/
B
/
b
to create an index name.
Press
V
/
v
to select a character, then press
B
/
b
to move the cursor to the next position.
If you made a mistake
Press
B
/
b
until the character you want to
change flashes, then press
V
/
v
to select the
correct character.
Tips
• You can select the character type as follows by
pressing
V
/
v
.
Alphabet (upper case)
t
Numbers
t
Symbols
• To enter a blank space, press
b
without
selecting a character.
2
Press
to enter the name.
The entered name is registered.
Note (Models of area code CEL, CEK
only)
When you name an RDS station and tune in that
station, the Program Service name appears instead
of the name you entered. (You cannot change the
Program Service name. The name you entered will
be overwritten by the Program Service name.)
Using the Radio Data
System (RDS)
(Models of area code CEL, CEK
only)
This receiver also allows you to use RDS
(Radio Data System), which enables radio
stations to send additional information along
with the regular program signal. You can
display RDS information.
Notes
• RDS is operable only for FM stations.
• Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are
not familiar with the RDS services in your area,
check with your local radio stations for details.
Simply select a station on the FM
band using Direct Tuning (page 52),
Automatic Tuning (page 51), or
Preset Tuning (page 54).
When you tune in a station that provides RDS
services, “RDS” lights up and the program
service name appears on the display.
Note
RDS may not work properly if the station you tuned
to is not transmitting the RDS signal properly or if
the signal strength is weak.
Receiving RDS broadcasts
