Cautions on using IS12S
Safety Precautions (Observe Strictly)
Handling precautions
Specific Absorption Rate (SAR) of cell phones
Intellectual property rights
・
Company names, product names and system names referred to in this
manual are generally trademarks or registered trademarks of respective
companies. The TM,
®
marks may be omitted in this manual.
・
In this manual, "Setting Guide", "Start Guide", "
取扱説明書詳細版
(Full
Instruction Manual)" (Japanese), "Cautions on using IS12S", "
携帯電話の比吸
収率などについて
(Radio Frequency (RF) exposure and Specific Absorption
Rate (SAR))" are collectively referred to as "Instruction Manual".
・
In this manual, "XPERIA acro HD IS12S" is usually referred to as "IS12S" or
"the product".
February 2012, 1st Edition 1263-3424.1
■
Before using this product, thoroughly read these safety precautions
for proper use. After reading, store the precautions in a safe place.
●
These "Safety Precautions" describe instructions that should be observed to
prevent damage to property or injury to the customer or others using IS12S.
●
These instructions are divided into the following categories.
■
Explanation of indications used in this manual
*1 Serious injury: This refers to loss of sight, injury, burns (high- and low-
temperature), electric shock, broken bones, injuries with
residual aftereffects from poisoning, etc., and injuries
requiring hospital admission for treatment or long-term
hospital attendance as an outpatient.
*2 Injury:
This refers to injuries, burns (high- and low-temperature),
electric shock, etc. that do not require hospital admission for
treatment or long-term hospital attendance as an outpatient.
*3 Physical damage: This refers to extended damage to buildings, furniture,
livestock, or pets.
■
Explanation of graphic symbols
■
Precautions common to the IS12S main unit, battery pack,
charging equipment, au IC-Card, peripheral devices
Be sure to read this manual before use.
Safety Precautions (Observe Strictly)
This symbol indicates the potential and imminent
danger of death or serious injury
(*1)
to a person.
This symbol indicates the possibility of death or serious
injury
(*1)
to a person.
This symbol indicates the possibility of personal
injury
(*2)
to a person or physical damage
(*3)
.
Indicates an action that is
not allowed.
Indicates that use in a place
where the product is likely to
get wet is not allowed.
Indicates that disassembly
is not allowed.
Indicates an action that
must be done.
Indicates that handling with
wet hands is not allowed.
Indicates that the power
plug must be disconnected
from the power outlet.
Dan
g
er
Warnin
g
Caution
Don't
No liquid
s
No di
s
a
ss
embly
Do
No wet
hand
s
Unplu
g
Be sure to read the following hazards before use.
Be sure to use only the exclusive peripheral devices. Use of other
peripheral devices might cause overheating, fire, rupture, fault, or
leakage of liquid.
Specified and common peripheral devices for IS12S:
・
Sony Ericsson AC adapter 04 (EP800A)
・
Desktop Holder (DK200)
Do not use, store or leave the product in hot places (e.g. by the fire,
near a heater, under a kotatsu, in direct sunlight, in car in the hot sun).
Doing so might cause ignition, rupture, fault, fire or injury.
Before entering an area where flammable gas is generated such as a
gas station, be sure to turn off IS12S. Do not charge the battery.
Failure to do so might cause the gas to catch fire. In addition, when
using Osaifu-Keitai
®
at a gas station, be sure to turn off the power in
advance. (If Osaifu-Keitai lock has been set, cancel the lock before
turning off the power.)
Do not put the product in a cooking apparatus such as microwave
oven or a pressure vessel. Doing so might cause ignition, rupture,
fault, fire or injury.
Do not throw the product into a fire or heat it. Doing so might cause
ignition, rupture or fire.
Do not short-circuit the desktop holder connection terminal, microUSB
connection terminal, headset connection terminal, or HDMI
connection terminal. Do not allow conductive foreign objects (metal
fragments, pencil leads, etc.) to come into contact with or get inside
the desktop holder connection terminal, microUSB connection
terminal, headset connection terminal, or HDMI connection terminal.
Doing so might cause fire or a fault.
When using a metal strap or accessory, take sure not to allow the metal
part come in contact with the microUSB connection terminal or AC
adapter power plug. Doing so might cause electric shock, ignition, injury
or a fault.
Dan
g
er
When plugging the AC adapter into an outlet, do not allow a metal
strap or accessory come in contact with the power plug. Doing so
might cause fire, electric shock, injury or a fault.
Do not expose the camera lens to direct sunlight for an extended
period. Doing so might cause ignition, rupture or fire by the light-
collecting mechanism of the lens.
The customer is not allowed to disassemble, modify or repair the
product. Doing so might cause a fault, iginition, electric shock, or injury.
The Company is not liable even in the event of any nonconformities
arising on IS12S or peripheral devices as a result of modification, etc.
Modification of the product is in violation of the Wireless Telegraphy Act.
Be sure to read the following warnings before
use.
Do not drop or subject to strong impact, such as throwing. Doing so
might cause rupture, overheating, ignition, leakage or a fault.
Do not use outside when you can hear thunder. Doing so might risk
lightning strikes and electric shock.
Do not let your hands, fingers and other parts of the body touch the
desktop holder connection terminal, microUSB connection terminal,
headset connection terminal or HDMI connection terminal. Doing so
might cause electric shock, injury or a fault.
If IS12S is damaged because it is dropped or something, and its
display is cracked or internal parts are exposed, do not touch the
cracked display or exposed parts with your hands. Doing so might
cause electric shock or injury from damaged parts. Contact an au
shop or Customer Service Center.
Although IS12S has waterproof property, stop use if liquid such as
water gets inside the main unit from the microUSB connection
terminal, headset connection terminal, HDMI connection terminal,
microSD memory card insertion slot, au IC-Card slot, etc. Continued
use of the product in this state might cause overheating, fire or a fault.
Warnin
g
■
IS12S Main unit
Never charge the battery if the IS12S main unit is wet. Doing so might
cause electric shock or short circuit resulting in a fault or a fire. Faults
caused by wetting with water are not covered by the warranty and
repairs cannot be performed.
If charging is not completed after the specified charging time, stop
charging. Failure to do so might cause leakage, overheating, rupture
or ignition.
Be sure to read the following cautions before
use.
Do not store the product in places subject to direct sunlight (e.g. in
car), places that get hot, places that get extremely cold, and in humid
or dusty places. Doing so might cause overheating, ignition,
deformation or a fault.
Do not leave on unstable places such as rocky stands or tilting surfaces.
Dropping the product may cause injury or damage. Also, pay sufficient
attention to impact, etc. Be careful in particular when vibration is set.
Do not cover or wrap the product with bedding, etc. while using or
charging the product. Doing so might cause fire, fault or injury.
Do not leave in places within the reach of small children. Small children
might swallow small parts, etc. by mistake and choke on them, or
might drop the product by mistake and cause accidents or injury.
Children using the product should be instructed in proper operation to
avoid danger by an adult. Do not allow them to use the product
without adult supervision. Failure to do so might cause injuries.
Do not touch the IS12S main unit or AC adapter for a long time while
power is being supplied from an external source. Doing so might
cause low-temperature burns.
When using IS12S touching your skin such as putting the product in a
pocket, it may cause low-temperature burns depending on how the product
touches your body, how long it lasts or how the surrounding conditions are.
In particular, when using a heating apparatus such as a kotatsu, heater,
electric blanket, etc. in the close range, note that keeping IS12S close to
your body may make IS12S hot, causing low-temperature burns.
Caution
Do not use power outlets or wiring apparatus beyond its rating. Also,
exceeding rating, for example, by connecting multiple devices to a
single power strip might cause overheating and fire.
Do not use the product when you have removed the microUSB
connection terminal cover, headset connection terminal cover, HDMI
connection terminal cover, microSD memory card insertion slot cover,
or au IC-Card insertion slot cover. Doing so might allow dust or other
foreign objects to get inside and cause a fault.
Do not place near corrosive chemicals or in places where corrosive
gas is generated. Doing so might cause a fault or loss of internal data.
Do not leave or store with the rear cover removed from IS12S. Doing
so might allow dust or other foreign objects to get inside and cause a
fault.
Do not flick a microSD memory card with your fingernail. The microSD
memory card might jump out, and cause injury or a fault.
Do not use if there is smoke, abnormal odor or noise, excessive
overheating, or other abnormalities. If an abnormality occurs,
disconnect the AC adapter from the power outlet, make sure that the
product is not overheating before turning the power off, and contact
an au shop or Customer Service Center. Also, if you have dropped or
damaged the product, do not continue to use it in that state, and
contact an au shop or Customer Service Center.
When using an AC adapter or external device, insert/remove the
connector straight to/from the terminal. Make sure the orientation of the
connector is correct. Failure to do so might cause damage or a fault.
Obey the following rules for viewing 3D images.
・
When viewing 3D images taken with IS12S on the 3D compatible
monitor, be careful not to view for long hours. Doing so might cause
eyestrain, fatigue, feeling ill, etc.
・
When viewing 3D images, take a break periodically. Determine how
long or often break is needed by yourself since It varies by
individuals.
・
If you feel discomfort, stop viewing 3D images until you recover.
Consult a doctor as required. See also instruction manuals of
devices or software connected to IS12S.
・
The vision of young children (especially younger than 6 years old) is
under development. Before young children view 3D images, consult
a pediatrician or ophthalmologist. Adults should supervise young
children to obey above precautions.
Be sure to read the following warnings before
use.
Do not disassemble, modify or directly solder the battery pack. Doing
so might cause spilling of the battery liquid resulting in an accident
such as loss of eyesight if it gets into eyes, or cause overheating, fire
or rupture.
Do not puncture IS12S with a nail, hit it with a hammer or step on it.
Doing so might cause ignition or damage.
Be careful not to have IS12S bitten by your pet. Doing so might cause
leakage, overheating, rupture or ignition of the battery.
Be sure to read the following warnings before
use.
Do not use a cell phone while driving a car or riding a motorbike or
bicycle. Doing so might cause a traffic accident. Use of a cell phone
while driving a car or motorbike is prohibited by law. Use of a cell
phone while riding a bicycle may be punishable by some regulations.
Do not use IS12S while you are aboard an airplane. Use of electric
devices transmitting radio waves in airplane is prohibited by law.
Some airline companies, however, allow their passengers to use cell
phones. For details, contact the airline company you use.
When the microUSB cable connection is made to IS12S microUSB
connection terminal to charge the battery etc., the power is turned on, but
operation is not available. Therefore, microUSB cable connection should
not be made in areas where use is prohibited, such as in airplanes and
hospitals.
Dan
g
er
Warnin
g
Turn IS12S off near high-precision electronic devices. The product
sometimes affects electronic equipment. (Examples of electronic
devices that might be affected by the product include cardiac
pacemakers, hearing aids, other electronic medical devices, fire
alarms, and automatic doors. If you are using an electronic medical
device, contact the device manufacturer or retailer for information
about the possible affect of radio waves.
）
When using IS12S near an implanted pacemaker, implanted
cardioverter-defibrillator or other electronic medical device, radio
waves might affect these units and devices. So, please observe the
following.
1. Those with an implanted pacemaker or implanted cardioverter-
defibrillator should carry or use IS12S at least 22 cm away from the
implanted pacemaker or implanted cardioverter-defibrillator.
2. Turn IS12S off in crowded trains or other crowded places, since
there may be people with an implanted cardiac pacemaker or
implanted cardioverter-defibrillator nearby.
3. Pay attention to the following points when using the product inside
medical institutions.
・
Do not bring IS12S into operating theaters, intensive-care units
(ICU) and coronary care units (CCU).
・
Turn IS12S off in hospital wards. If the function to automatically
turn ON the power is set, cancel the setting before turning the
power OFF.
・
Even if you are in a lobby, etc., be sure to turn IS12S off when
there are electronic medical devices nearby.
・
When a medical institution has laid down designated areas where
use of the product is prohibited or is not allowed to be brought in,
abide by the instructions of that medical institution.
4. When using electronic medical devices other than an implanted
pacemaker and implanted cardioverter-defibrillator outside a
medical institution (e.g. home medical treatment), check
individually with the manufacturer of the electronic medical device
regarding the influence of radio waves.
Stay alert to your surroundings when calling, messaging, shooting
photos, playing games, browsing the Internet, watching TV (1Seg) or
listening to music. Failure to do so might cause a fall or traffic
accident.
■
Internal battery
(The internal battery of IS12S is a lithium-ion
battery.)
The internal battery is not fully charged at the time of
purchase. Charge the battery before using the product.
Do not send data by infrared communication with the infrared port
pointing toward eyes. Doing so might affect eyes. Also, sending data
with the infrared port pointing toward some other infrared device
might cause false operation, etc.
Flash/Photo light emits strong light. Do not light the photo light in front
of a person's eyes. Do not gaze at the light emitting part when the
flash/photo light is lighted. Doing so might cause impairment of
eyesight, etc. Be especially careful not to shoot small children from a
very close distance.
Do not light the flash/photo light toward a driver of a car, motorbike or
bicycle. If dazzled by the light, the driver might become unable to
drive and cause an accident.
Sometimes, very rarely some people demonstrate symptoms such as
temporary muscle spasms, loss of consciousness, etc. by receiving
stimulation by strong light or watching repeatedly flickering screens.
Those with a past history of this should consult with a physician
beforehand.
Be sure to read the following cautions before
use.
The Bluetooth
®
function, wireless LAN (Wi-Fi
®
) function and FeliCa
™
reader/writer function of IS12S conform to domestic wireless
standards in Japan and FCC/IC/CE standards, and have been
certified. Use of the Bluetooth
®
function, wireless LAN (Wi-Fi
®
)
function and FeliCa
™
reader/writer function may be restricted in some
countries/regions. If you are using the wireless LAN function overseas,
check the relevant laws and regulations of the country/region you visit.
Use of the product in a car sometimes affects on-vehicle electronic
devices, though this rarely happens. If this happens, stop use since
this may impair safe travel.
If you feel any abnormality with your skin, immediately consult a
dermatologist. Itching, rashes, eczema, etc. sometimes occurs
depending on your physical constitution and condition. The materials
of parts used on IS12S are as follows.
Caution
Part
Material
Surface treatment
External case
(Front cover)---Black
PC resin (with
glass)+SUS sheet
metal
Urethane coating
External case
(Front cover)---White, Pink
PC resin (with
glass)+SUS sheet
metal
UV coating
External case
(Rear frame)
PC resin
(with glass)
Non-conductive
vacuum
metallization
(tin)+UV coating
External case
(Back cover)---Black
PC resin
(with glass)
Urethane coating
External case
(Back cover)---White, Pink
PC resin
(with glass)
UV coating
Exterior case
(HDMI connection terminal cover,
Headset connection terminal cover,
microUSB connection terminal cover)
PC resin
Non-conductive
vacuum
metallization
(tin)+UV coating
Exterior case
(microSD memory card insertion slot
cover, au IC-Card insertion slot cover)
---Black
PC resin
(with glass)
Non-conductive
vacuum
metallization
(tin)+UV coating
Exterior case
(microSD memory card insertion slot
cover, au IC-Card insertion slot cover)
---White, Pink
PC resin
(with glass)
Non-conductive
vacuum
metallization
(tin)+UV coating
Transparent plate (Camera)
PC resin+
PMMA resin
AR treatment
Transparent plate (Flash)
PC resin
−
Transparent plate (Display)
Glass + PET resin Hard coating
Power key, Volume key, Camera key
PC resin
UV coating
Whip antenna (cover)
PC/ABS resin
−
Whip antenna (top of shaft)
SUS
−
Whip antenna (middle of shaft)
SUS
−
Whip antenna (bottom of shaft)
Nickel titanium
−
Whip antenna (top of hinge)
SUS
Tin-cobalt plating
Whip antenna (bottom of hinge)
Brass
Tin-cobalt plating
Do not bring the product close to or put it into magnetized objects
such as cash cards, floppy disks, credit cards, and prepaid cards.
Doing so might result in loss of recorded information.
Do not swing IS12S around by holding the Stereo Headset with
Microphone (Sample) or hand strap. Doing so might cause injury,
accident, malfunction or damage. Do not use a damaged hand strap.
Do not allow liquids, metal objects, burnable items, and other foreign
matter to get inside the microUSB connection terminal, headset
connection terminal, HDMI connection terminal, microSD memory
card insertion slot and au IC-Card insertion slot. Doing so might cause
fire, electric shock or a fault. Use the product with the covers closed.
If the covers are open, dirt or water may get inside causing a fault.
Stow the whip antenna properly when not watching TV (1Seg). If you
operate the product for calling, etc. with the whip antenna extended, it
might cause unexpected injury by hitting your face, etc.
If you have a weak heart, be careful when setting the incoming
vibration and ringtone volume. They might affect heart.
Pay attention to items becoming stuck to the earpiece, speaker, display.
These parts use magnets, and so thumbtacks and pins, craft knife blades,
staples, and other metal objects sometimes become stuck to the main
unit, and cause unexpected injury. Before using the product, be sure to
check that there are no foreign objects on the earpiece or other parts.
Do not place the product directly on sand at a beach, etc. Sand or
other small particles might get inside the earpiece, microphone or
speaker, causing the volume to drop. If sand gets inside the IS12S
main unit, it might cause overheating or a fault.
When using IS12S for calling, data communication or watching TV
(1Seg), be careful not to keep IS12S in direct contact with your skin
for a prolonged period, or not to cover the product with paper, cloth,
bedding, etc. Doing so might cause fire, burns or a fault.
Do not fold the whip antenna or swing IS12S with the whip antenna extended.
Doing so might cause injury or deform or damage of the whip antenna.
Part
Material
Surface treatment
Do not use ballpoint pens, pencils or other sharp-pointed objects for
touch panel operation. Doing so might cause display damage.
Do not operate the touch panel with fingernails. Doing so might result
in split nails causing injury.
When connecting the Stereo Headset with Microphone (Sample) with
IS12S to play games, music or watch TV(1Seg), adjust the volume to
the proper level. Too loud volume may cause a hearing loss. And, if
you cannot hear the sound around you clearly, it may cause an
accident.
Mishandling is dangerous as it might cause
overheating, leakage or rupture. Be sure to read
the following hazards before use.
If the leaked liquid gets on your skin or clothes, immediately rinse it off
with water to avoid injury. If the liquid gets into your eyes, do not rub
but wash your eyes with water, and immediately consult a doctor to
avoid the risk of losing your eyesight. If the liquid gets on a device,
wipe it off without touching it.
The battery is a consumable item. If the performance of a battery
does not recover (e.g. the usable time after each charge has become
extremely short), the battery is at the end of service life, so stop using
the battery. Failure to do so might cause overheating, ignition, rupture
or leakage. Since the battery is built-in type, IS12S is taken by au
shop etc. and a repair is charged. Also, you cannot use the product in
certain period of time. Note that the length of service life varies
depending on the usage condition, etc.
Dan
g
er
■
Charging equipment
■
au IC-Card
■
Stereo Headset with Microphone (Sample)
Mishandling might cause overheating, fire,
electric shock, etc. Be sure to read the following
warnings before use.
Do not use at other voltages than the specified power supply voltage.
Doing so might cause ignition, fire, overheating or electric shock.
AC adapter: 100 VAC to 240 VAC (Connect to the AC outlet for internal
household use)
When charging the product overseas, use AC Adapter for global use.
Firmly insert the AC adapter's power plug into the power outlet down
to the base of its pins. Incomplete insertion of the power plug might
result in electric shock or fire caused by overheating and fire. Do not
use damaged AC adapters or loose power outlets.
Do not damage, modify, twist, pull or place a heavy object on the
microUSB cable of the AC adapter. Do not use a damaged microUSB
cable. Doing so might cause an electric shock, short circuit or fire.
Do not let your hands, fingers and other parts of the body touch the
desktop holder connection terminal or microUSB connection terminal.
Doing so might cause electric shock, injury or a fault.
If you hear thunder, do not touch the power plug. Doing so might
cause an electric shock as a result of a lightning strike.
Before cleaning the charging equipment, unplug AC Adapter plug
from the power outlet. If the plug remains plugged in when you clean
the equipment, it might cause an electric shock or short circuit. Also,
wipe off dust on the AC Adapter plug. Failure to do so might cause
fire, burns or electric shock.
Install and position in-car devices where they do not hinder driving or
safety equipment such as airbags. Failure to do so might cause a
traffic accident. Install in-car devices following the instructions of their
manuals.
Remove the power plug from the outlet when not using the adapter for
an extended period. Failure to do so might cause electric shock, fire
or a fault.
Warnin
g
The AC adapter is not waterproof. Do not use in places subject to
splashing with water, pet urine or other liquids. Doing so might result
in faults resulting from overheating, fire, electric shock, or short-
circuiting of electronic circuits. In the event that the product is
splashed with liquid, immediately disconnect the AC adapter's power
plug.
Mishandling might cause overheating, fire,
electric shock, malfunction, damage, etc. Be
sure to read the following cautions before use.
Do not leave the desktop holder on the floor. Doing so might cause
injury or accident if they accidentally step on the holder or fall.
Do not use in humid places such as bath areas, or connect/
disconnect the AC adapter with wet hands. Doing so might cause
electric shock or a fault.
Charge the battery in a stable place. If placed on an inclined surface
or wobbly stand, the product might fall causing injury or damage. Be
careful especially when vibration is set. In addition, do not cover or
wrap the product with a cloth or bedding. Doing so might cause
removal of IS12S, fire or a fault.
When unplugging the AC adapter power plug from the outlet, hold
and pull the power plug. If you pull the microUSB cable, the microUSB
cable might be damaged.
Do not use the desktop holder in a car. Doing so might disturb driving
and cause an accident. It is presumed that the desktop holder will be
used in the room and stable place.
If you feel any abnormality with your skin, immediately consult a
dermatologist. Itching, rashes, eczema, etc. sometimes occurs
depending on your physical constitution and condition. The materials
of parts used on the Sony Ericsson AC adapter 04 and Desktop
Holder are as follows.
Part
Material
Surface treatment
[microUSB cable] plug part
PBT resin
−
[microUSB cable] cable
Elastomer resin
−
[microUSB cable] noise filter cover
PP resin
−
[AC adapter] exterior
PC resin
−
Caution
[AC adapter] plug (Metallic part)
Copper alloy
Nickel plating
[Desktop Holder] upper case
ABS resin
−
[Desktop Holder] lower case
ABS resin
−
[Desktop Holder] inner chassis
ABS resin
−
[Desktop Holder] lock
POM resin
−
[Desktop Holder] button
POM resin
−
[Desktop Holder] safety lever
POM resin
−
[Desktop Holder] output terminal
Phosphor bronze
Gold plating
[Desktop Holder] rubber foot
Polyurethane resin
−
Be sure to read the following warnings before
use.
Do not put the au IC-Card in a cooking apparatus such as a
microwave oven or a pressure vessel. Doing so might cause melting,
overheating, fuming, loss of data or a fault.
Be sure to read the following cautions before
use.
Be careful not to injure your hand or finger when attaching/removing
the au IC-Card.
Use only the devices specified by the Company to insert the au IC-
Card in. Using a device not specified by the Company might cause
loss of data or a fault. For the specified devices, contact an au shop
or Customer Service Center.
Do not disassemble or modify the au IC-Card.
Doing so might cause loss of data or a fault.
Do not use or leave the au IC-Card in hot places such as by the fire or
a heater. Doing so might cause melting, overheating, fuming, loss of
data or a fault.
Part
Material
Surface treatment
Warnin
g
Caution
Do not throw the au IC-Card into a fire or heat it. Doing so might cause
melting, overheating, fuming, loss of data or a fault.
Do not touch the IC (metal) part of the au IC-Card or short-circuit it.
Doing so might cause loss of data or a fault.
Do not drop the au IC-Card or subject it to strong impact. Doing so
may cause a fault.
Do not fold, bend or place a heavy object on the au IC-Card. Doing so
may cause a fault.
Do not wet the au IC-Card. Doing so may cause a fault.
Do not scratch the IC (metal) part of the au IC-Card. Doing so might
cause a fault.
Do not store the au IC-Card in dusty places. Doing so might cause a
fault.
Do not store the au IC-Card in places exposed to direct sunlight or hot
and humid places. Doing so may cause a fault.
Store the au IC-Card out of reach of small children. Failure to do so
might cause injury, etc. if they accidentally swallow and choke on it.
Be sure to read the following warnings before
use.
Do not use the product to play games, music or watch TV (1Seg)
while driving a car or motorbike, or riding a bicycle or walking. Doing
so might compromise traffic safety and cause an accident.
Warnin
g
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
