Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
128(128)
Step-by-Step Instructions
5.
Insert the rubber plug in display carrier’s unoccupied
plug hole and press the plug down into the hole.
NOTE! When the plug is installed correctly, the
visible portion of the plug should appear
round in shape.
6.
If both rubber plugs are being replaced, repeat the
previous two steps to install the other rubber plug.
•
Perform sections 3.2.2 - 3.2.3 of the Flip Reassembly Procedure
5
Revision History
Rev.
Date
Changes / Comments
A 2005-Sept.
13
•
Initial Release
B 2005-Oct.
5
•
Added a comment to the rear speaker module installation section regarding
the need to install an RF absorber when installing a new rear speaker
module in a W600 product.