White paper
V640i
31
October 2007
rëÉê=fåíÉê~Åíáçå=ïáíÜ=pfj=^q
aáëéä~ó=íÉñí
Text of up to 240 characters (120 UCS coded) is
supported.
Text clearing times are 5–20 seconds with a 60-
second time-out limit for the user to clear the text.
‘Key’ responses:
• ‘End key’ – Proactive session terminated by
user.
• ‘Back’ – Backward move in proactive session.
Any other key clears the screen if the command is
performed successfully.
dÉí=áåâÉó
Prompt for a one-character input. Pressing ‘Ok’
without entering a character gives warning mes-
sage “Minimum 1 character”. ‘Key’ responses:
• ‘C’ clears current character.
• ‘End key’ terminates the proactive session.
• ‘Back’ – Backward move in proactive session.
• ‘OK’ – Command performed successfully.
dÉí=áåéìí
Prompt for character input. The phone will refuse to
accept further input when maximum response
length is exceeded. UI Maximum Response
lengths:
• Digits Only – 160 characters.
• SMS default alphabet characters – 160 charac-
ters.
• Hidden Characters (digits only) – 20 characters.
‘Key’ responses:
• ‘C’ clears current character.
• ‘End key’ terminates the proactive session.
• ‘Back’ – Backward move in proactive session.
• ‘OK’ – Command performed successfully.
pÉäÉÅí=áíÉã
Scroll to highlight item for selection. ‘Key’
responses:
• Navigational key press down – Scroll down list.
• Navigational key press up – Scroll up list.
• ‘End key’ terminates proactive session.
• ‘Back’ – Backward move in proactive session.
• ‘OK’ – Command performed successfully.
pÉåÇ=ëÜçêí=ãÉëë~ÖÉ
Default message “Sending message, please wait”
can be replaced for the Alpha Identifier text, or
suppressed completely if a null text is provided.
Default responses are “MESSAGE FAILED” or
“MESSAGE SENT”. ‘Key’ responses:
• ‘End key’ or ‘Back’ ends the proactive session.
pÉí=ìé=Å~ää=
If you are on a call when the commands ‘Set up
Call’, ‘putting all other calls on hold' are sent, the
user will see the text 'Setting up a call current call
will be held'. If ‘OK’ is pressed the current call will
be put on hold and the new call set up. If you are
on a call when the command ‘Set Up Call, discon-
necting all other calls’ is sent, the user will see the
SET UP MENU
Yes
TIMER MANAGEMENT
Yes
OPEN CHANNEL
Yes
CLOSE CHANNEL
Yes
RECEIVE DATA
Yes
SEND DATA
Yes
GET CHANNEL STATUS
Yes
Service Mode
Support
