Some menus/features are operator dependent.
Using Voice Control
This is the Internet version of the user’s guide. *Print out for private use only.
re-record these commands if you wish. See “Training
Commands” on page 51.
1 Activate voice dialing using one of these methods:
•
Say your Magic Word
•
Press and hold a side volume key
•
Press and hold the handsfree button
(when using portable handsfree)
2 When prompted, say a command, such as “call”.
3 Wait for the beep. Now say the name of the contact
you want to call.
4 You will hear “Calling Bob”. If there are multiple
numbers for that name, you will be prompted to
say the number type.
Voice Number Dialing
It is possible to dial a phone number by speaking the
digits with a short pause between each digit. Each digit
already has an associated voice command in English,
but you can re-record these commands if you wish.
See “Training Commands” on page 51.
1 Activate voice dialing using one of these methods:
•
Say your Magic Word
•
Press and hold a side volume key
•
Press and hold the handsfree button
(when using handsfree)
2 When prompted, say “dial” and the digits for the
number you want to call. The phone will repeat
each number with either a
Number Echo
or
Tone
.
3 Say “call” to begin dialing.
Digit Feedback
When you are using Voice Number Dialing, your phone
will respond to indicate that it understood your
command. Settings include
Number Echo
and
Tone
.
Echo feedback will echo the accepted digit while tone
Note!
Say “clear” to clear a single digit. If you say clear
two times in a row, you will be asked if you want
to clear the entire number.
Note!
Say “verify” to hear all numbers played back
to you.
T206cug_R2_ae.book Page 55 Friday, August 9, 2002 3:09 PM
