Working Instructions
, SP/
Mechanical
3_00021-1/FEA 209 544/78 C
Sony Ericsson Mobile Communications AB
15(23)
•
Disassemble the phone as described in
1 Disassembly
(
page 2
), follow steps 1-10
#
Figure
Instruction
Note
1
(Fig. 3.6.1)
Remove the LCD gasket
with a pair of tweezers.
(Fig. 3.6.1)
Be careful so you don’t
damage the LCD gasket
or the LCD assy.
2
Fig. 3.6.2
Use your fingers to release
the hooks for the LCD, by
pushing them outwards
from the PCB. Start with
the 2 hooks at the right or
the left side.
(Fig. 3.6.2)
3
Fig. 3.6.3
Release the LCD contact by
pulling the ZIF-connector
lock upwards. Remove the
LCD flex film.
(Fig. 3.6.3)
Be careful so you don’t
damage the LCD flex
film.
4
Pick up a new LCD
Avoid any contact with
all surfaces. Use gloves!
5
Fig. 3.6.4
Mount the LCD flex film in
the LCD contact with your
fingers. Close the ZIF-
connector with a pair of
tweezers as shown at the
picture.
(Fig. 3.6.4)
Be careful so you don’t
harm the LCD flex film.
