Working Instructions
, SP/
Mechanical
3_00021-1/FEA 209 544/78 C
Sony Ericsson Mobile Communications AB
11(23)
3.3 Battery
connectors
3.3.1 Process
Tools
•
Pair of tweezers
3.3.2 Equipment
•
ESD-gloves (cotton gloves)
•
ESD-wristband
3.3.3
Instructions
•
Disassemble the phone as described in
1 Disassembly
(
page 2-4
), follow steps 1-5
#
Figure
Instruction
Note
1
Fig. 3.3.1
Use a pair of tweezers to
remove the battery
connectors.
(Fig. 3.3.1)
2
Pick up a new battery
connector with a pair of
tweezers.
Make sure that the
connector not is bend or
damage in any way.
3
Fig. 3.3.2
Pick up a battery
connector with the help of
a pair of tweezers and
mount it into the hole in
the rear cover. Repeat this
step with the other battery
connector.
(Fig. 3.3.2 & Fig. 3.3.3)
Make sure that the battery
connector is fitting correct
and that it is not damage in
any way. If the connector
is bend or it does not fit
correctly, replace it.
4
Fig. 3.3.3
•
Assemble the phone as described in
2 Reassembly
(
page 5-6
), follow steps 1-7