K600/K608/V600 Working Instructions - mechanical
3/00021-1/FEA 209 544/94 A
Company Internal
Sony Ericsson Mobile Communications AB
3(33)
2 Introduction
SPECIAL TOOLS
No new special tools are introduced but a few other
Sony Ericsson tools are required:
•
NTZ 112 459 Torque screwdriver (or equivalent) set
to 20 Ncm
±
6% and 11 Ncm
±
2 Ncm
•
NTZ 112 288 Torx bit no. 6 (for 20 Ncm)
•
NTZ 112 1052 Phillips bit (for 11 Ncm)
•
NTZ 112 521 Flexfilm assembly tool
•
NTZ 112 302/2 Front opening tool
STANDARD TOOLS
The following tools have to be locally purchased:
•
Dentist hook
•
Blunt pair of tweezers
•
Guitar pick
ESD EQUIPMENT
Protect the phone from ESD damages whenever it has been opened by using:
•
ESD-gloves (cotton gloves)
•
ESD-wristband
ADHESIVES
Use a dentist hook or a blunt pair of tweezers to remove old adhesives.
If necessary, clean the surface with isopropyl alcohol before attaching new adhesives.
CAUTIONS
•
Keep all contact surfaces clean, no dirt or hand grease!
•
Be careful when using tools like the dentist hook, tweezers, opening tools, guitar pick etc.
to avoid scratches or damages to the exterior and interior parts of the phone!
•
Be careful not to damage the contact springs on parts like the microphone and vibrator!
•
Remember to remove the protection foils on new parts such as the front case and
the LCD!
•
Never touch the display glass!
•
Use air blow equipment to keep the front window and display module dust free!
