This is the Internet version of the user's guide. © Print only for private use.
8
Getting started
3
Sony Ericsson strongly recommends
that
you use only Sony Ericsson
branded original batteries, the part of
power supply device in accordance
with YD/T 1591-2006 specifications
of Communications Industry Standards
of P. R. China
(Part A in the new-type
charger illustration)
and the USB
cable supplied with your phone to
charge the phone.
The use of third-
party products may decrease the
performance of your phone and/or
pose a risk to your health or safety.
4
Sony Ericsson recommends that
you
never mix the use the new USB
charger and the old non-USB charger.
The phone with new-type charger in
box cannot be charged with the old-
type charger, and vice versa.
The use
of both the chargers may decrease the
performance of your phone and/or
pose a risk to your health or safety.
Turning on your phone
Make sure the phone is charged and
a SIM card inserted before turning the
phone on. After turning on your phone,
use the setup wizard to quickly and
easily prepare for use.
To turn on the phone
1
Press and hold
. The first start-up
may take a few minutes.
2
Select a mode:
• Normal
– limited functionality with
network and Bluetooth™ transceivers
off.
3
Enter your SIM card PIN, if requested.
4
At first start-up, select the language
for your phone menus.
5
}
for the setup wizard to help you.
6
Follow instructions to complete setup.
For more information,
You can use the phone during charging.
You can charge the battery for more or
less than 2.5 hours. Interrupted charging
will not damage the battery.
