Working Instruction
,
Mechanical
3/000 21-1/FEA 209 544/127 A
©
Sony Ericsson Mobile Communications AB
24(30)
3.19 KRH label
Follow the 2.1.1 – 2.1.1 Disassembly instructions!
Read the old KRH label and/or write the information into the
“Label make” program before removal
Note the position of the KRH label before removal
Heat up the KRH label by using hot air, if needed.
Carefully remove the KRH label without causing scratches
If there still are residues, clean the surface with isopropyl
alcohol
Check that the proper KRH label format is loaded in the
Zebra printer.
Write a new KRH label by using the program “Label make”
and check that the printing is OK.
Take the new KRH label and place it onto the frame as in
the adjacent picture.
O
NE
KRH
LABEL ONLY IS ALLOWED
!
Follow the 4.1.1 – 4.1.3 Reassembly instructions!
