USING THE UNIVERSAL DEVELOPER'S KIT
69
LZT 123 8020 R1A
12 Using the Universal Developer's Kit
This section details the specific developer's board settings for
the GM/GM 47R5/48 family. It is important that you verify these
settings before powering up the developer's board and module.
The following configurations should be considered the baseline
whenever attempting to resolve issues with the board or
module. Note that HW flow control is turned on.
Caution!
Ensure the Rotary Switch has been set to 4 prior to powering on
the Developer's Board. Failure to do so may result in damage to the
module.
12.1 Gx-47/48 Setup
Switch Settings:
Rotary Switch Setting
(SW104)
Audio Switch S201
Audio Switch S202
Flash Switch S101
4
Bypass
Bypass
DCD
Table 2: Baseline Switch Settings for Gx-47/48
Jumper Settings:
X100
(Supply
Source)
X101
(VDIG
source
select)
X102
(Flash)
X400
(SIM)
X501
(TD)
X502
(RD)
X503
(Buzzer)
TP101
(Test
Point)
Internal
1-2
Normal
Installed
Sec Port
Sec Port
Installed
Installed
Table 3: Baseline Jumper Settings for Gx-47/48
X603
(PCM)
X601
(RTC)
X401
(TO_IN)
X402
(DTR_PWR_ON
)
X403
(I
2
C Address)
X406
(I
2
C Data)
X407
(I
2
C Clk)
Internal
Installed
Installed
Installed
Uninstalled
Installed
Installed
Table 4: Baseline Jumper Settings for Gx-47/48
All manuals and user guides at all-guides.com
