HINTS FOR INTEGRATING THE RADIO DEVICE
53
LZT 123 8020 R1A
7 Hints for Integrating the Radio Device
This chapter gives you advice and helpful hints on how to
integrate the radio device into your application from a hardware
perspective.
Please read and consider the information under the following
headings before starting your integration work:
•
Safety advice and precautions.
•
Installation of the radio device.
•
Antenna.
7.1 Safety Advice and Precautions
7.1.1
General
•
Always ensure that use of the radio device is permitted. The
radio device may present a hazard if used in proximity to
personal medical electronic devices. As a rule, the radio
device must not be used in hospitals, airports or planes.
•
You are responsible for observing your country’s safety
standards, and where applicable the relevant wiring rules.
•
Never use the radio device at a gas station, refuelling point,
blasting area or in any other environment where explosives
may be present.
•
Operating the radio device close to other electronic devices,
such as antennas, television sets, and radios may cause
electromagnetic interference.
•
Never try to dismantle the radio device yourself. There are
no components inside the radio device that can be serviced
by the user. If you attempt to dismantle the radio device, you
may invalidate the warranty.
•
To protect the power supply cables and meet the fire safety
requirements, it is recommended that the electrical circuits
are supplied with a power regulator. The power regulator
should be placed as close to the terminals of the power
supply as possible.
•
Do not connect any incompatible component or product to
the radio device.
Note!
Sony Ericsson does not warrant against defects, non-
conformities or deviations caused thereby.
All manuals and user guides at all-guides.com
