Sonus
– Network Design Group
3 Configuring Sonus SBC 1000 and SBC 2000 Series
The SBC 1000 and SBC 2000 share a common code base and user interface. In this example, we are using an
SBC 1000.
3.1 SBC Configuration Diagram
Lync 2013 Signaling Group
Internal
Lync 2013
External
Signaling Group: To/From MS Lync 2013
Call Routing: To Lync 2013
Signaling Group: To/From ThinkTel
Call Routing: To PSTN
10.35.180.136:5060
SIP over TCP
ThinkTel
10.35.177.226:5060
208.68.17.52:5060
216.110.2.235:5060
SIP over UDP
Figure 2: SBC 1000 SIP Trunk Diagram
3.2 External Peer Side SBC Configuration
Node Interfaces
The Sonus SBC 1000 allows you to configure the Identification information, Physical Data Layer, and Networking
Layer for the Ethernet ports. If you want to change the IP address, you must configure the associated
Logical
Interface
or use the
Modify Ethernet IP
task found under the Tasks tab.
