background image

54

  These hearing aids are 

water resistant and not 
waterproof. They are 
designed to withstand 
normal activities and 
occasional accidental 
exposure to extreme 
conditions. Never immerse 
your hearing aid in water! 
These hearing aids are not 
specifically designed for 
extended periods of water 
submersion on a continual 
basis, that is worn in 
activities such as 
swimming or bathing. 
Always remove your 

19.2 Information on product safety

hearing aid before these 
activities, as the hearing 
aid contains sensitive 
electronic parts. 

  Never wash the 

microphone inputs. Doing 
so could cause it to lose its 
special acoustic features. 

  Protect your hearing aid  

from heat (never leave near  
a window or in the car). 
Never use a microwave or 
other heating devices to 
dry your hearing aid. Ask 
your hearing care 
professional about suitable 
drying methods. 

54

55

 

Avoid strong physical 
impacts to the ear when 
wearing a hearing aid with 
customized earpiece. The 
stability of customized 
earpieces is designed for 
normal use. A strong 
physical impact to the ear 
(e.g. during sports) may 
cause the customized 
earpiece to break. This may 
lead to perforation of the 
ear canal or eardrum.

 

After mechanical stress or 
shock to the customized 
earpiece, please ensure 
that it is intact before 
placing it in the ear.

 

Use of this equipment 
adjacent to or stacked with 
other equipment should be 
avoided because it could 
result in improper 
operation. If such use is 
necessary, this equipment 
and the other equipment 
should be observed to 
verify that they are 
operating normally.

Summary of Contents for Phonak Audeo M
































Reviews: