Sonotec SONAPHONE E Operating Manual Download Page 64

Page: 64 / 66

SONAPHONE

Operating Manual – Revision: 2.4 | 2020-11-17

Page 64 of 66

12 Warranty

SONOTEC GmbH provides a warranty of twelve months from the date of

sale for the SONAPHONE

E and their accessories. Within the warranty

period, SONOTEC GmbH will correct all defects caused by faults in

material or manufacturing without extra charge. SONOTEC GmbH will

fulfil the warranty agreement by either repairing or replacing the defective

device or component.
Not covered by the warranty are primary or secondary batteries and

damages due to incorrect use, abrasion, or interference with the

equipment. Furthermore, the warranty does not cover those defects

which affect the value or usability of the equipment only insignificantly.



We reserve the right to make technical changes without notice. Supply

is based on availability.

Summary of Contents for SONAPHONE E



































































Search results

Summary of Contents for SONAPHONE E

Reviews:

Related manuals for SONAPHONE E

Brands by name

Popular brands

Sonotec SONAPHONE E, Operating Manual

Search results

Summary of Contents for SONAPHONE E

Reviews:

Related manuals for SONAPHONE E

Brands by name

Popular brands