When renaming a preset, a maximum of 12 characters can be used to describe it.
The SELECT encoder is used to select the character to be edited while the MODIFY
encoder is used to change the character. The available character set is as follows:
ABCDEFGHIJKLMNOPQRSTUVWXYZ012-*&/()=!?:;
␣
4.21 Power Menu
The power menu allows the user to power down the SX-M2D2 and displays
information about power status, such as power source, estimated battery charge and
battery voltage measurement.
Power source
Power down
Battery state of charge
Battery voltage [mV]
Battery charge [mAh]
Power setup menu
4.22 Power Setup Menu
The power setup menu allows user to change the charge current (see section Li-ion
Charger).
Charge current
Automatic Power down
A charge current of 1A or 0.5A can be selected. Default is 0.5A.
The Power Down menu enables automatic power down in the case of a defined event:
1. NONE: no automatic power down
2. HIROSE CUT: device will power down when the Hirose DC voltage is
removed
3. ENCODER L+R: device will power down when both encoders are kept
pressed for 2-3 seconds. When enabled, the interface lock is no longer
available.
SX-M2D2+ User Manual
28/37
