Chapter 2: ZonePlayer Setup and Operation
2-3
Rear Panel Connectors
Ethernet switch connectors (4)
Use Category 5 Ethernet cable to connect to a router,
computer, or additional network device such as a
network-attached storage (NAS) device.
LED indicators:
•
Green (link connection)
•
Flashing Yellow (network activity)
Right speaker terminals
Use high-quality speaker wire to connect the right
speaker to the ZonePlayer.
Left speaker terminals
Use high-quality speaker wire to connect the left
speaker to the ZonePlayer.
Voltage select
(AC 115/230 V)
Up position
=AC 115 V, 120 V nominal (U.S./Canadian
factory setting)
Down position
=230 V, 240 V nominal (European factory
setting)
AC power (mains) input
Use the supplied power cord to connect to power outlet.
Analog audio outputs (variable)
You may use a standard RCA audio cable to connect the
ZonePlayer’s analog audio outputs to the audio inputs
on a separate audio component, such as an amplifier or
your home theater receiver.
Ethernet
switch
connectors
Right speaker
terminals
Left speaker
terminals
Voltage select
115V/230V
AC power (Mains)
input
Analog audio inputs
Analog audio outputs
Subwoofer output
