Sonos CONNECT:AMP
7
Use
Compressed
if:
• You are connecting more than 4 rooms wirelessly.
• You are in an environment with heavy wireless interference and are experiencing dropouts.
To change the line-in encoding setting, select one of the following options:
• On a mobile device, go to
More
->
Settings
->
Advanced Settings
->
Audio Compression
.
• On a PC, go to
Manage
->
Settings
->
Advanced
.
• On a Mac, go to
Sonos
->
Preferences
->
Advanced
.
Surround speakers
You can easily pair two speakers, such as two PLAY:5s, with a Sonos home theatre product to function as left
and right surround channels in your Sonos surround sound experience.
If you have a CONNECT:AMP and speakers, you can configure the CONNECT:AMP for surround use.
Both
the CONNECT:AMP and the PLAYBASE/PLAYBAR must be wired in this configuration
—this is a
requirement only when configuring a CONNECT:AMP for surround. It is not a requirement for normal use of
these products.
Set up CONNECT:AMP surround
1.
Connect the PLAYBASE/PLAYBAR to your router with an Ethernet cable.
2.
Connect the CONNECT:AMP to your router, or to the PLABASE/PLAYBAR, with an Ethernet cable.
3.
Attach desired speakers to the CONNECT:AMP (power rating should be at least 75W for 8 Ohm
speakers and at least 150W for 4 Ohm speakers.)
4.
Position the speaker connected to the
Left
terminal on the CONNECT:AMP as the left surround speaker in
your surround sound setup.
5.
Position the speaker connected to the
Right
terminal on the CONNECT:AMP as the right surround
speaker in your surround sound setup.
Note:
If this is a newly purchased CONNECT:AMP, be sure to add it to your Sonos
system before attempting to set up surround speakers.
Note:
Make sure your PLAYBASE/PLAYBAR is not currently configured with any
other surround speakers. It can be configured with a SUB.
Summary of Contents for CONNECT:AMP
Page 1: ......
