Sonoro SO-310, Operating Manual

Page: 53 / 203

8.1
Switching on the device for the first
time
After you have switched the device on for the first
time, the LC display shows the clock display and the
[Tune to FM RDS station to set time & date] message.
i
In FM/DAB mode, the time and date are set auto‐
matically unless this function has been disabled.
8.2 Standby menu
The following settings can be configured in the
Standby menu:
n
Setting the time manually.
n Setting the date manually.
n
Switch the date on the display on/off.
The procedure to set the individual functions is the
same.
Setting the time manually
Fig. 10: Setting the time manually
1.
In Standby mode, press the [MENU] button on
the device or the remote control.
ð
The display shows the [Set Time] menu
(Fig. 10).
2. Press the click wheel to set the hours.
ð
The hour display will flash.
3. Turn the click wheel to set the hours.
4. Press the click wheel to confirm the setting.
ð
The minute display will flash.
5. Turn the click wheel to set the minutes.
6. Press the click wheel to confirm the setting.
ð
The time is set.
i
Use the [Next] and [Previous] buttons to
toggle between the hours and minutes
display.
i
After 10 seconds of inactivity, the device automat‐
ically switches to Standby mode without saving
the settings.
Setting the date manually
Fig. 11: Setting the date
1.
In Standby mode, press the [MENU] button on
the device or the remote control.
ð
The display shows the [Set Time] menu
(Fig. 10).
2. Turn the click wheel until [Set Date] is shown.
3. Press the click wheel.
ð
Now you can set the date by rotating the
click wheel.
i
You can switch between the day, month
and year display by pressing the click
wheel.
Switching the date on/off
Fig. 12: Switching the date on/off
1.
In Standby mode, press the [MENU] button on
the device or the remote control.
ð
The display shows the [Set Time] menu
(Fig. 10).
2. Turn the click wheel until [Display Date] is
shown.
3. Press the click wheel.
ð
Now you can switch the date on or off.
8.3 Settings menu
In operating mode, the following configurations can
be made in the [Settings] menu:
n Set the time format.
n
Set the date format.
©
2013 53