STEP 4
A. ROTATE ASSEMBLED UNIT ONTO OUTER SIDE OF
RIGHT ARM (C) ON A FLAT, PROTECTED SURFACE.
B. PLACE LEFT ARM (D) ONTO SEAT (A) AND BACK
(B) INSERTING 2 POSTS ON BACK (B) THROUGH
HOLES IN LEFT ARM (D). CONNECT WITH SMALL
BOLTS (I) AND SMALL WASHERS (J) USING SMALL
ALLEN WRENCH (L). DO NOT TIGHTEN
COMPLETELY.
C. ATTACH LEFT ARM (D) TO SEAT (A) WITH LARGE
BOLTS (E) AND LARGE WASHERS (F) USING LARGE
ALLEN WRENCH (H). DO NOT TIGHTEN
COMPLETELY.
D. TIGHTEN COMPLETELY ALL LARGE BOLTS (E) AND
SMALL BOLTS (I) USING LARGE ALLEN WRENCH (H)
AND SMALL ALLEN WRENCH (L).
E. COVER LARGE BOLTS (E) USING LARGE BOLT
CAPS (G).
STEP 5
A. ROTATE ASSEMBLED UNIT TO UPRIGHT
POSITION.
B. COVER SMALL BOLTS (I) WITH SMALL BOLT
CAPS (K).
C. ADJUST LEG LEVELERS AS NEEDED SO THAT IT
SITS STABLE ON THE FLOOR.
ASSEMBLY INSTRUCTIONS (CONTINUED)
SONOMA PRESIDIO STATIONARY CHAIR ASSEMBLY INSTRUCTIONS
Page 3/4
