STEP 1
A. PLACE OUTER SIDE OF RIGHT ARM (C) ON A FLAT,
PROTECTED SURFACE.
B. ATTACH SEAT (A) TO RIGHT ARM (C) WITH LARGE
BOLTS (E) AND LARGE WASHERS (F) USING LARGE
ALLEN WRENCH (H). DO NOT TIGHTEN
COMPLETELY.
STEP 3
A. CAREFULLY ROTATE THE ASSEMBLED UNIT TO
THE UPSIDE DOWN POSITION.
B. INSERT 2 POSTS ON BACK (B) THROUGH HOLES
IN RIGHT ARM (C) CONNECTING WITH SMALL
BOLTS (I) AND SMALL WASHERS (J) USING SMALL
ALLEN WRENCH (L). DO NOT TIGHTEN
COMPLETELY.
ASSEMBLY INSTRUCTIONS (CONTINUED)
STEP 2
A. INSERT 3 POSTS ON SEAT (A) THROUGH HOLES
ON BACK (B) CONNECTING AT THE 2 OUTER POSTS
WITH SMALL BOLTS (I) AND SMALL WASHERS (J)
USING SMALL ALLEN WRENCH (L). DO NOT
TIGHTEN COMPLETELY.
SONOMA PRESIDIO STATIONARY CHAIR ASSEMBLY INSTRUCTIONS
Page 2/4
