SMX SERIES
page 9
52. FUSE HOLDER/IEC MAINS RECEPTACLE:
The console is connected to the mains
via the cable supplied, which meets the required safety standards. Blown fuses must only be replaced
by fuses of the same type and rating. The mains connection is made via a cable with IEC mains
connector. An appropriate mains cable is supplied with the equipment.
53. POWER SWITCH:
Use the POWER switch to turn on the mixing console. The POWER switch
should always be in the “Off” position when you are about to connect your unit to the mains. To
disconnect the unit from the mains, pull out the main cord plug. When installing the product, ensure
that the plug is easily accessible.
54. GND CONTACT:
GND in order to avoid leakage.
55. CONTROL ROOM OUT JACKS:
The control room output is normally connected to the
monitoring system in the control room and carries the stereo mix or, when selected, the solo signals.
SWITCHES
50. PHONES JACK:
Connect a pair of headphones to this TRS phone-type output jack.
51. SWITCH HEADPHONES
between MIX and SUB channel.
52
55
53 54
