INTRODUCTION
The SMX Series of mixers are compact live sound mixing consoles. Focus is on providing the engineer with
a variety of features like additional mic inputs, multiple aux, global and local EQs, and subgroups. Input
connectivity on BT and USB are available with record output to onboard USB. In a slim, compact form-factor,
the SMX is an excellent console for small events where sound quality is paramount.
FEATURES
• High-Performance small format analogue mixers with onboard effects
• Mic preamps with low noise performance
• EQ with sweep-able mid-bands per channel
• Bluetooth to connect tab or phone
• USB rec and playback
• 32bit 42kHz Effects Engine featuring Reverbs, Delays, Choruses and Modulations
• Trim Limiters on input channels
• Combo inputs for guitars, basses and other instruments
• Hi-Pass Filters (low-cut) and 48V Phantom Power on all mic channels (12 and 16 channel)
• Smooth premium-quality faders
• Robust polymer lightweight construction for tour-grade build quality and reliability
• Internal universal power supply
• DC 5V lamp connector
• +48V phantom power
• XLR balanced outputs
INITIAL OPERATION
• Be sure that there is enough space around the unit for cooling purposes and to avoid over-heating.
Do not place your mixing console on high-temperature devices such as radiators or power amps.
• The console is connected to the mains supply via the supplied cable.
• The console meets the required safety standards.
• Blown fuses must be replaced only by fuses of the same type and rating.
• Note that all units must be properly grounded. For your own safety, you should never remove any ground
connectors from electrical devices or power cables, or render them inoperative.
CONNECTORS
XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), pin 3: cold (-).
SMX 1008
page 2
INTRODUCTION/ FEATURES/ INITIAL OPERATION