Optional Steps:
To check if the USB Audio Codec was installed correctly:
To check if the USB Audio Codec was selected by your system:
Open your Device Manager:
Click Start, Click Control
Panel, Click System, Select
Hardware tab, Click Device
Manager button.
Click on the
[+]
next to
Sound Video and Game
Controllers and look for USB
Audio Device.
Click on the Universal Serial
Bus controllers and check for
USB Composite Device.
Close your Device Manager.
Normally as soon as your Sedley is
plugged into your PC it will auto-
matically registered as your new
audio device.
To check this Click Start, Click
Control Panel, Click Sound and
Audio Devices, Select the Audio tab.
You should see USB Audio Codec
selected in the Sound Playback and
Sound Recording box, if it is not
there please click on the symbol
and select it.
Mack sure the box that says: Use
only default devices is checked.
Click Apply and then OK.
