background image

8.

After the dialog box disappears you will return to the Select Destination
screen; click ‘Select’ 

(Figure 6)

.

9.

At the Important Information screen read the Installing Mac OS 8.5
onscreen documentation; click ‘Continue’ 

(Figure 7)

.

10.

At the Software License Agreement screen read the software license agree-
ment; click ‘Continue’. A dialog box appears asking you to agree to the
terms of the software license agreement.  If you agree, click ‘Agree’

(Figure 8)

.

11.

At the Install Software screen click ‘Start’ 

(Figure 9)

.

12.

A dialog box may appear stating that the Mac OS Installer will automati-
cally quit all running applications to begin the software installation.
Click ‘Continue’ to begin with the installation 

(Figure 10)

.

(Installation instructions continued on next page)

Mac OS 8.5 Installation Instructions - Presto PPC Processor Upgrade Card

2

Figure 7: Important Information screen

Figure 8: Agree to Software License Agreement

Figure 9: Click ‘Start’ to Install Mac OS 8.5

Figure 10: Click ‘Continue’ to begin installation

click ‘Continue’

then click ‘Agree’

click ‘Start’

Figure 6: Click ‘Select’ to continue installation

click ‘Select’

first click ‘Continue’

click ‘Continue’

Summary of Contents for Presto PPC














Reviews: