First steps
WHAT IS IN THE BOX
1.
The Kratos amplifier
2.
Power cord ( only Euro or USA based power cords)
3.
Remote cable (Optional)
FIRST STEPS
1. Power requirements:
Check if the product is made conform the power requirements of your area. On the back side the product is marked
for the specific mains voltage.
2. Switch settings:
On the bottom of the product you will find two tiny slots. Behind each slot there is a switch. One switch is used to set the
input for the RCA or XLR input. The next switch will activate the “music sense” circuitry. Please set these switches in the desired mode first by
using a thin object such as a small screw driver. The default setting is Music sense to “Off” and XLR input selected which is the upper position of
both switches.