Sonnenkonig 10520301, User Manual, Page: 41 / 44

41
6 Operating instructions
7 Cleaning and maintenance
1. Insert the plug into a 220-240V~ / 50-60Hz electrical power supply outlet.
2. Press the function keys on the touch control panel as follows:
•
POWER: Turn the fan on by pressing the ON/OFF key; pressing this key again turns it off and
puts the fan into standby mode. Unplug the power cord to turn off the fan completely. We
recommend unplugging the power cord when the machine is not in use to prolong its lifetime.
• SPEED: Adjust the fan speed to the desired level: HI, MID or LOW. The LED indicator will
change accordingly: HI ( ), MID ( ), LOW ( ).
• MODE: Press this key to set the fan mode: Normal, Natural, Sleep and Auto. The LED indicator
will change accordingly: Natural ( ), Sleep ( ), Auto ( ).
• NATURAL MODE: Fan speed will fluctuate automatically in a set time interval to simulate
natural breeze.
• SLEEP MODE: Fan speed will fluctuate automatically in a set time interval to provide a com-
fortable sleeping environment.
• AUTO MODE: When the room temperature is 25° C or below, the fan will stop automatically.
When the room temperature is higher than 25° C, the fan will run automatically.
•
TIMER:
Press the Timer key to choose a timer setting between 30 minutes and 24 hours. The
blue LED display will show the time selected. Then the fan will automatically shut off when the
selected time has elapsed.
• SWING: Press the OSC key to turn on the oscillation function. Press again to turn it off.
3. Whether you use the remote control or the control panel, the functions are identical.
• Always unplug the unit before moving or servicing.
• Unplug the unit and wait until the fan stops running before cleaning.
• Never immerse the power cord, plug or the appliance as a whole in water or rinse under the tap.
• To avoid damaging the appliance, do not use detergent, gasoline, benzene, thinner or any other
solvents to clean the unit.
• Use a damp cloth to clean the surfaces of the fan.
• We recommend checking and cleaning the filter every 2 weeks. Remove the filter cover carefully
and take out the filter. Clean the filter with a vacuum cleaner or damp cloth. Dry the filter before
replacing it. To avoid any damage, we suggest placing the fan on a flat surface before removing
the filter cover.
• After cleaning, ensure the unit is completely dry before connecting to the power supply.
• The fan must not be disassembled, except by an authorised service agent or other person quali-
fied to undertake electrical repairs.
• If the fan will not be used for a long time, store it in a cool, dry and safe place well away from
children. Do not store the appliance in hot places or in direct sunlight.
EN