9
5.2 Setting the backup buffer
The backup buffer energy volume will need to be set for you by the installer at point of installation of the
sonnenProtect arrangement. Backup buffer setting can be modified at a later time by contacting the service
division of sonnen Australia: please contact via the
6 Maintenance
For fault-free, safe, reliable and long-lasting operation of the sonnenProtect, it is essential to carry out regular
function checks and cleaning.
6.1 Checking function
Maintenance interval Action to be taken
Every 6 months
►
Check the function of the insulation monitor with help of the Test key (see 3.2)
6.2 Cleaning
Risk of material damage due to use of unsuitable cleaning agent
or
excessive water
Unsuitable cleaning agents can scratch the surfaces. Furthermore, if cleaning is not carried out properly,
water can get inside the sonnenProtect and cause damage. For this reason:
►
Do not use scouring cloths, sponges or cleaning agent.
►
Use only moist cloths, not wet cloths.
►
Do not use water jets.
►
Carefully clean the outside of the sonnenProtect with a clean, moist cloth. For tougher dirt, use a small
amount of household dishwashing detergent on a moist cloth.