Sonifex Redbox RB-VHCMA4 User Handbook Manual Download Page 77

Page: 77 / 84

Redbox Embedder/De-embedder User Handbook

SCI

When in channel control mode, all of the bank and channel selection boxes become
available, allowing you to individually select a bank and channel to embed to each group
channel.

Embed Enable

: This control enables embedding for the selected group.

Bank/Channel

: Selects the Embed bank and/or channel to embed to the group.

Enable

: Individually enables each channel within the group. Only used in channel control

mode.

Audio Group Delete

Allows the deletion of audio groups on a per output basis. Simply select the group to
enable deletion.

SD 24-Bit Enable

: This enables 24-bit embedding in SD. This is selectable on a per output

basis. Before enabling this option, ensure that any receiving equipment is capable of
handling the extended data packets.

Audio Inputs Page

Fig 7-5: SCi Audio Inputs Screen

This page allows you to configure the audio inputs for the available Embed banks. This
page is not available on the RB-VHDMA8 unit.

Summary of Contents for Redbox RB-VHCMA4





















































































Search results

Summary of Contents for Redbox RB-VHCMA4

Reviews:

Related manuals for Redbox RB-VHCMA4

Brands by name

Popular brands

Sonifex Redbox RB-VHCMA4, User Handbook Manual

Search results

Summary of Contents for Redbox RB-VHCMA4

Reviews:

Related manuals for Redbox RB-VHCMA4

Brands by name

Popular brands