manualshive.com logo in svg

Sonifex Redbox RB-VHCMA4, User Handbook Manual

Share
Download
Sonifex Redbox RB-VHCMA4 User Handbook Manual Download Page 73

Redbox Embedder/De-embedder User Handbook

61

SCI

SCI

7

7 SCi

System Page

Fig 7-1: SCi System Screen

This page is used for the connecting and disconnecting SCi to the unit, updating the firmware 
in the units, displaying the current status of the unit and controlling various settings.

Status
Video Input

Shows the current SDI input rate, video format and the audio groups status. When an audio 
group is detected in the incoming stream the status is set to PRESENT, and MISSING when that 
group is not detected.

Video Output 1 & 2

The two video output status boxes show the audio group status for each output.There are 
three states per output and these are described below.

PASS

 : This audio group is  being passed through on this output. 

EMBED

 : This audio group is being embedded on this output. 

DELETE

 : This audio group is being deleted on this output.

 

Summary of Contents for Redbox RB-VHCMA4





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands