manualshive.com logo in svg

Sonifex Redbox RB-DSD8, User Handbook Manual

Share
Download
Sonifex Redbox RB-DSD8 User Handbook Manual Download Page 32

20

Redbox RB-DSD8 User Handbook

SCI FOR RB

-DSD8

6

SCI FOR RB-DSD8

6. SCi for RB-DSD8

The free of charge Sonifex SCi software allows you to control the RB-DSD8 remotely. 
The interface has two tabs including a status page and a miscellaneous options page. 
The status of the connection, serial number & firmware versions are always visible at the 
bottom of the screen.

Please note: In order to edit the options on the Status and Miscellaneous pages, the  
RB-DSD8 must have the back panel Remote Control Enable DIPSwitch set to ON (DIPSwitch 
9, Bank 3, see page 9).

Status Page

Fig 6-1: Status Page.

Channel Panels

  - Click on the panel to select this channel pair. The drop down boxes will 

display the settings for the selected channel pair.

Each Channel Panel contains:

Presence LEDs

 – Indicate the current audio levels on the respective inputs.

Link LEDs

 –  Indicate a link between the two adjacent channel sets.

Summary of Contents for Redbox RB-DSD8









































Reviews:

No comments

Brands by name

Popular brands

Load more brands