55
Audio Distribution Amplifier - RB-AES4X3 16
Technical Specifications RB-AES4X3
Cable drive capability
The table below sets out the minimum signal amplitude required to drive
ϭϬϬŵ;ĐƵŵƵůĂƚŝǀĞͿŽĨϭϭϬёƚǁŝƐƚĞĚƉĂŝƌĐĂďůĞ͕ďĂƐĞĚŽŶƚŚĞƐĂŵƉůĞƌĂƚĞ
of the digital audio:
Sample Rate
Minimum Signal Amplitude
32kHz
*2Vpk-pk
44.1kHz
*2Vpk-pk
48kHz
*2Vpk-pk
88.2kHz
5Vpk-pk
96kHz
5Vpk-pk
* Minimum of 2Vpk-pk is defined by the AES3 format specification.
The table below sets out the minimum signal amplitude required to drive
ϯϬŵ;ĐƵŵƵůĂƚŝǀĞͿŽĨϭϭϬёƚǁŝƐƚĞĚƉĂŝƌĐĂďůĞ͕ďĂƐĞĚŽŶƚŚĞƐĂŵƉůĞƌĂƚĞŽĨ
the digital audio:
Sample Rate
Minimum Signal Amplitude
176.4kHz
3Vpk-pk
192kHz
3Vpk-pk
Equipment Type
RB-AES4X3
Quad 3 Way Passive Digital AES3 Splitters, with
XLR connections in a 19” rack.
Physical Specification
Dimensions (Raw):
48cm (W) x 10.8cm (D) x 4.2cm (H)(1U)
19” (W) x 4.3” (D) x 1.7” (H) (1U)
Dimensions (Boxed):
58.5cm (W) x 22.5cm (D) x 7cm (H)
23” (W) x 8.9” (D) x 2.8” (H)
Weight:
Nett: 1.02kg Gross: 1.38kg
Nett: 2.25lbs Gross: 3.04lbs
Source
Splitter
Destination 1
Destination 2
Destination 3
100m
Short
Short
Short
Sample Rate = 96kHz
Signal Amplitude = 5V
pk-pk
100m cumulative
Source
Splitter
Destination 1
Destination 2
Destination 3
Short
10m
10m
10m
Sample Rate = 192kHz
Signal Amplitude = 3V
pk-pk
30m cumulative
Source
Splitter
Destination 1
Destination 2
Destination 3
50m
50m
50m
50m
Sample Rate = 48kHz
Signal Amplitude = 2V
pk-pk
200m cumulative
Examples of use of cumulative cabling:
Fig 16-4: RB-AES4X3 Examples Of Cumulative Cabling
