54
16 Audio Distribution Amplifier - RB-AES4X3
Controls & Connectors
Fig 16-3: RB-AES4X3 Rear Panel
AES/EBU input(s)
The single digital audio input is via a female XLR connector with the
following pin assignment:
Pin 1: 0V Common
Pin 2: Phase
Pin 3: Non Phase
AES/EBU outputs 1-3
The digital audio outputs are via male XLR connectors with the following pin
assignment:
Pin 1: 0V Common
Pin 2: Phase
Pin 3: Non Phase
AES/
EBU
Input
AES/
EBU
Outputs
AES/
EBU
Input
AES/
EBU
Outputs
AES/
EBU
Input
AES/
EBU
Outputs
AES/
EBU
Input
AES/
EBU
Outputs
Termination
Switches
Termination
Switches
Termination
Switches
Termination
Switches
Termination switches
/ƚŝƐƉŽƐƐŝďůĞƚŽƚĞƌŵŝŶĂƚĞKƵƚƉƵƚϮĂŶĚKƵƚƉƵƚϯǁŝƚŚϭϭϬёŝŶƚŚĞĞǀĞŶƚ
that they are not connected to a destination device. It may be necessary to
remove termination from an unused output if a used output is connected to
a destination via a long cable run, in order to increase the level of the AES3
carrier signal.
