background image

ii

CM-CU21 Commentator Unit User Handbook

(ii)   for any breach by the Company of any statutory undertaking as to title, quiet 

possession and freedom from encumbrance.

(d)   Subject to conditions (a) and (c) from the time of despatch of the Goods from the 

Company’s premises the Purchaser shall be responsible for any defect in the Goods 
or loss, damage, nuisance or interference whatsoever consequential economic or 
otherwise or wastage of material resulting from or caused by or to the Goods. In 
particular the Company shall not be liable for any loss of profits or other economic 
losses. The Company accordingly excludes all liability for the same.

(e)   At the request and expense of the Purchaser the Company will test the Goods to 

ascertain performance levels and provide a report of the results of that test. The 
report will be accurate at the time of the test, to the best of the belief and knowledge 
of the Company, and the Company accepts no liability in respect of its accuracy 
beyond that set out in Condition (a).

(f)   Subject to Condition (e) no representation, condition, warranty or other term, 

express or implied (by statute or otherwise) is given by the Company that the Goods 
are of any particular quality or standard or will enable the Purchaser to attain any 
particular performance or result, or will be suitable for any particular purpose or use 
under specific conditions or will provide any particular capacity, notwithstanding 
that the requirement for such performance, result or capacity or that such particular 
purpose or conditions may have been known (or ought to have been known) to the 
Company, its employees or agents.

(g)  (i)  

To the extent that the Company is held legally liable to the Purchaser for any  

 

single breach of contract, tort, representation or other act or default, the    

 

Company’s liability for the same shall not exceed the Price of the Goods.

(ii)   The restriction of liability in Condition (g)(i) shall not apply to any liability 

accepted by the Seller in Condition (c).

(h)   Where the Goods are sold under a consumer transaction (as defined by the 

Consumer Transactions (Restrictions on Statements) Order 1976) the statutory 
rights of the Purchaser are not affected by these Conditions of Sale.

WARRANTY

W

ARR

ANT

Y

Summary of Contents for CM-CU21

































Reviews: