Sonifex CM-CU21, User Handbook Manual

Page: 24 / 32

14
CM-CU21 Commentator Unit User Handbook
CM-CU21 COMMENTATOR UNIT
C
ONFIGUR
A
TION OPTIONS
5
Configuration option settings for page 6
Commentator 1 ON AIR button:
Mode 1 ON AIR and TALKBACK button brightness level 1 (minimum brightness).
Mode 2 ON AIR and TALKBACK button brightness level 2.
Mode 3 ON AIR and TALKBACK button brightness level 3.
Mode 4 ON AIR and TALKBACK button brightness level 4.
Mode 5 ON AIR and TALKBACK button brightness level 5.
Mode 6 ON AIR and TALKBACK button brightness level 6.
Mode 7 ON AIR and TALKBACK button brightness level 7 (maximum brightness) (default).
Commentator 1 TALKBACK A button:
No associated option on this page. This button illuminates green to indicate button
brightness level.
Commentator 1 TALKBACK B button:
No associated option on this page. This button illuminates amber to indicate button
brightness level.
Commentator 2 ON AIR button:
Mode 1 PPM display brightness level 1 (minimum brightness).
Mode 2 PPM display brightness level 2.
Mode 3 PPM display brightness level 3.
Mode 4 PPM display brightness level 4.
Mode 5 PPM display brightness level 5 (default).
Mode 6 PPM display brightness level 6.
Mode 7 PPM display brightness level 7 (maximum brightness).
Mode 8 PPM display disabled.
Commentator 2 TALKBACK A button:
No associated option on this page. This button illuminates amber to indicate button
brightness level.
Commentator 2 TALKBACK B button:
No associated option on this page. This button illuminates green to indicate button
brightness level.
Commentator 3 ON AIR button:
No associated option on this page. This button illuminates red to indicate button
brightness level.
Configuration options for page 7
The last page allows you to save the current option settings to either of two available
backup sets that are unaffected by subsequent changes to the option settings. The backup
sets can then be reloaded when required. The load/save functions will only work whilst
in page 7. Page 7 also shows the current firmware version by flashing the Limit LED in a
recurring sequence i.e. 1 flash for version 1, 2 flashes for version2 etc.