47
Embedded Web Server
13
Page Targets
– This is the list of up to 20 target intercom devices that will be
called during a page. To add to the list, select a new device from the
available intercom devices select box or manually enter the name in the
intercom devices edit and then press the ADD button. To remove one or
more targets from the list, highlight the required page targets and press the
DEL button. Multiple targets can be selected by clicking the required
options whilst holding down the Ctrl key on the keyboard.
Intercom Device
– A new page target intercom name can be added to the
list by entering the name in this edit box and pressing the ADD button.
Alternatively, it can be selected from the dynamic list of available intercom
devices detailed below.
Available Intercom Devices
– This dynamic drop down list shows the
intercom units that are currently visible on the network and available for
selection as a page target. Selecting an intercom from this list places the
intercom name into the intercom device edit box.
Page Settings Defaults
Page Priority:
Enabled
Page Targets:
none set
GPIO Settings Web Page
The GPIO Se�ngs page shows the current configura�on of the 10 GPIO
ports on the rear panel mounted GPIO connector. The func�ons, inputs and
states that control the output relay are also set here.
Fig 13-22: GPIO Se�ngs Web Page
