Sonifex AVN-PXH12, Handbook

Page: 13 / 28

5
Front Panel Controls 2
Channel Mute
The Mute button can be used to remove the channel source from the mix
output and it illuminates orange when muted.
Channel Solo
The knob, in addition to being a signal level of that channel, is also a press
and hold control that Solos the channel my muting all the other channels
in the output mix. When the knob is held down, the Mute buttons of the
other channels illuminate orange.
Source Earpiece Assignment
The Mono/St button is used to assign the left and right legs of the source
signal to the output:
Unlit Stereo input routes as a stereo output
Red The left input as a mono signal is sent to both left and right
outputs.
Green The right input as a mono signal is sent to both left and right
outputs.
Scribble Space
There is also a scribble space underneath for the user to label the channels
for easy identification.
Monitoring Outputs
The right hand side of the front panel contains the monitoring audio outputs
and volume controls. There are physical audio outputs on the rear of the
product.
Fig 2-4: AVN-PXH12 Front Panel Monitoring Outputs & Controls
Headphone Output Sockets
There is 1 x 6.35mm stereo jack socket and 1 x 3.5mm stereo jack socket with
a common volume control pot and software settable independent attenuation
values. Each output is individually driven to allow for both headphones to be
connected at the same time.
Each jack socket has the following connections:
Tip: Headphone Left
Ring: Headphone Right
Sleeve: Ground
When headphones are connected, the speaker is automatically muted.
Speaker Control
The front panel speaker has its own volume pot.
Speaker Mute
The LS Mute button is used to mute the loudspeaker output.