19
AVN-GMC Webserver & Webpage Parameter Details 2
Fig 2-9: AVN-GMC System Screen
System
Update Firmware
This page allows you to update the firmware running on the unit. New
versions of the firmware can be found on the appropriate product page on
the Sonifex website.
Procedure
Use the ‘Choose File’ button to open a browse window and navigate to an
AVN-GMC firmware file. File selection is protected by a filter which detects
correct file name and type. Once selected, click update. The front panel of
the unit should display that a file upload is in progress and then whether it
succeeded or failed. A webpage will also confirm this.
Once the upload is complete, the unit will reset. If the upload succeeded,
the unit will proceed to install the new firmware. This is indicated by a
series of green power button flashes (one flash, followed by two flashes,
followed by three). Then the unit will boot. It is possible that the front
panel code will also be updated. In this case, shortly after the power button
LED sequence, a progress bar will be displayed. An error condition in the
installation or boot up process is indicated by the power button flashing red
and green. In this case, contact Sonifex technical support for advice on how
to proceed.
Reboot
Click the reboot button to immediately reboot the unit. This will take
approximately 25 seconds during which a status bar will be displayed. Once
complete, the status webpage will be displayed.
Summary of Contents for AVN-GMC
Page 30: ...Notes...
Page 31: ...Notes...
Page 32: ...www sonifex co uk t 44 0 1933 650 700 f 44 0 1933 650 726 sales sonifex co uk...
